Aluminum MIG & TIG
Home / Consumables / Aluminum MIG & TIG
Superglaze 4043 MIG
KEY FEATURES
- Designed for welding heat-treatable base alloys and more specifically 6XXX series alloys
- Lower melting point and more fluidity than 5XXX series filler alloys
- Low sensitivity to weld cracking with 6XXX series base alloys
- Suitable for sustained elevated temperature service, i.e. above 65°C (150°F)
- Not recommended for materials to be anodized
CONFORMANCES
| SFA/AWS A5.10/A5.10M | : ER4043 |
|---|---|
| ASME SFA-A5.10 | : ER4043 |
| CWB/CSA W48-06 | : ER4043 |
| AMS4190K(Chemistry Only) | : 5.2Si (4043) |
Superglaze 4043 TIG
KEY FEATURES
- Use on many weldable cast and wrought aluminum alloys
- Generally recommended for welding 5052, any 6XXX series
alloys and castings - Embossed on each end for easy identification after use
CONFORMANCES
| SFA/AWS A5.10/A5.10M | : ER4043 |
|---|---|
| ASME SFA-A5.10 | : ER4043 |
| AMS4190K(Chemistry Only) | : 5.2Si (4043) |
Superglaze 5356 MIG
KEY FEATURES
- General purpose filler alloy for welding 5XXX series alloys
- The most widely used welding alloy
CONFORMANCES
| SFA/AWS A5.10 | : ER5356 |
|---|---|
| ASME SFA-A5.10 | : ER5356 |
| Lloyd’s Register | : WB/I-1 S |
| DNV Grade | : 5356 |
| GL | : RAIMg4 |
| BV Grade | : WB |
| CWB/CSA W48-06 | : ER5356 |
Superglaze 5356 TIG
KEY FEATURES
- Aluminum-magnesium alloy for use on many weldable cast
and wrought aluminum alloys - Generally recommended for welding any 5XXX or 6XXX series
aluminum alloys - Excellent for color matching after anodizing
- Embossed on each end for easy identification after use
CONFORMANCES
| SFA/AWS A5.10/A5.10M: 2012 | : ER5356 |
|---|---|
| ASME SFA-A5.10: | : ER5356 |